Course Overview



Schematics - Altium Designer - 1 Day





All too often in our efforts to learn an EDA tool, students get bogged down in the libraries and the general tool methodology. When following a tutorial, the schematic is boiled down to a place where we simply place parts and connect them together. For introductory purposes, this will get us to the PCB layout. However, there a lot of capabilities that not shown or used that can make the tool more efficient.




Watch the brief video on the highlights of this course.

 


This 1-day training was designed to show you the ins and outs of the Altium Designer schematic editor. This includes placing schematic components from various libraries sources into the schematic editor, connecting the components throughout the schematics through various nets, netlabels and ports primitives, and checking the design for errors and warnings.

This training will also demonstrate how PCB footprints are linked to the schematic components, as well as recommendations for how and which parameters to use to let Altium Designer create the bill of materials for you. For the purposes of creating manufacturing document, this training will show you how to generate the necessary output files that are rendered from the schematics (BOM and .PDF) and how to make use of the documentation batching capability in Altium Designer known as the Outjob file.

The course concludes with a study of how repeated circuitry is implemented in Altium Designer (also known as multi-channel design) and introduces you to the self-study resources available for simulation and signal integrity tools in Altium Designer.

Whether you are new to Altium Designer or have a few boards under your belt, this training was created for everyone who uses the Altium Designer schematic capture. For the beginners, you will gain proficiency. For those who are proficient, you will gain efficiency. With Altium Designer, if you understand the methodology of the schematic capture tool, you will have a good foundation for using the PCB layout editor.


You will be provided with a training manual (143-pages).

Cost: $995 (interactive, instructor-led online)



Course Agenda
Schedule





“The combination of a structured training course and flexible coaching hours for diving into detail questions has greatly increased the value we extract from Altium Designer. Nine Dot Connects gives us the experience of having an in-house Altium expert to bounce questions off, but at a much lower cost than trying to hire someone with this experience.”

Colin O'Flynn - CTO, NewAE Technology Inc.



"We first worked with Nine Dot Connects via their Altium Designer Boot Camp course. This course was both informative and practical. The instructor gave us a lot of advice that only a seasoned veteran of PCB design and Altium could provide. We also contracted with Nine Dot Connects for PCB layout services. The work was done very quickly and with high quality. I can wholeheartedly recommend them for both design and layout. Thanks to their services we have been able to keep our project on schedule."

Timothy Benson - EE, Xylem Inc.



"Taking a design from a start to end in the proper order. I took this course from (another provider) a couple of years ago. (it was) taught out of sequence - didn't get around to talking about library parts until day 3. Complete waste of time. Your course was far more valuable."

Ken Gott - Development Engineer, Sciton Inc.



"Dan Goddard performed training for 5 people for three days at our facility, and it was absolutely worth it. By the end of the third day, all persons under training were capable of taking a design from a sketch to a PCB layout. The training was absolutely worth every penny, and Dan’s industry knowledge and expertise in PCB design was the key to this success."

Scot Shermer, Senior Engineer - GE Oil & Gas



"Chip Pierce was an outstanding instructor. Deep understanding of and experience with the material, and ability to tailor the course to the skill level of the class made it an enjoyable 3 days. The flow of course material was logical and easy to follow, building on the lessons and days before.

Michael Rodzinski - Mechanical Test Systems Engineer, Tesla Motors, Inc.



“Nine Dot Connects trainer, Dan Goddard, is the best software instructor that I have seen in my 30 year engineering career. I have never seen an instructor so familiar with every feature of such a complex software product like Altium Designer. His extensive experience in using the software for numerous PCB designs allows him to impart extremely practical knowledge upon the trainees related to pitfalls encountered while using the software. There was no question that Dan could not answer. Outstanding course!”

John Tarmas - Electronics Engineer, Department of the Navy



“Dan Goddard taught a 3-day Altium class in Jacksonville from 9/6 to 9/8. He did an excellent job. I have not had such a good training class in long time. I had to leave before he finished the PCB routing section, so I did not get to say thanks for a job well done.”

Robert Loe, Fleet Readiness Center Southeast (FRCSE)